热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

Study on preparation and properties of polyether polytriazole elastomers

To explore the application of click chemistry in the field of elastomer materials, propargyl-terminated ethylene oxide-tetrahydrofuran copolymer(PTP(E-co-T)) was prepared from hydroxyl-terminated ethylene oxide-tetrahydrofuran copolymer(P(E-co-T)) by end-etherisation modification. FTIR and 13C-NMR results indicate that P(E-co-T)-terminated hydroxyl was etherified thoroughly, yielding the target product PTP(E-co-T), and the content of terminated alkynyl of PTP(E-co-T) was evaluated to be 0.428 mmol·g-1. Using a polyazide compound as a cross-linker, polytriazole elastomers with various functional molar ratio(R) values were prepared from PTP(E-co-T) by virtue of the Cu AAC reaction. Mechanical property tests indicate that with the increase in R, the modulus E and stress σb of the polytriazole elastomers first increase and subsequently decrease, whereas the strain first decreases and later increases. The mechanical properties of the polytriazole elastomers show a parabolic dependence on the R value. Near the stoichiometric ratio, E and σb show maxima and the strain εb shows a minimum. Swelling tests demonstrate that the apparent molecular weight of polytriazole elastomer strands also first decreases and subsequently increases. At the stoichiometric ratio, the network structure possesses strands with a minimum apparent molecular weight and a maximum apparent density. Dynamic mechanical analysis reveals that the polytriazole elastomers presented damping peaks at approximately-64 °C, corresponding to the glass transition of copolyether strands, and the elastomer exhibited the lowest dissipation factor tanδ at the stoichiometric ratio. Thermal analysis suggests that the weight-loss process of the polytriazole elastomer is characteristic of one-step decomposition, and the elastomer begins to decompose from polyether strands, not triazole groups.     

石墨烯层数测量方法的研究进展

石墨烯具有高导电性、高韧度、高强度、超大比表面积等特点,在电子、航天工业、新能源、新材料等领域有广泛应用。对石墨烯层数测量方法的研究有助于深入理解石墨烯性能与微观结构之间的关系。本文着重阐述了包括光学显微镜、拉曼光谱、原子力显微镜和透射电镜等测量石墨烯层数的方法,同时比较了各种测量方法的优点及局限性,并指出石墨烯层数的测量方法还有待进一步完善。     

Highly Dense Isolated Metal Atom Catalytic Sites: Dynamic Formation and In Situ Observations

Atomically dispersed noble‐metal catalysts with highly dense active sites are promising materials with which to maximise metal efficiency and to enhance catalytic performance; however, their fabrication remains challenging because metal atoms are prone to sintering, especially at a high metal loading. A dynamic process of formation of isolated metal atom catalytic sites on the surface of the support, which was achieved starting from silver nanoparticles by using a thermal surface‐mediated diffusion method, was observed directly by using in situ electron microscopy and in situ synchrotron X‐ray diffraction. A combination of electron microscopy images with X‐ray absorption spectra demonstrated that the silver atoms were anchored on five‐fold oxygen‐terminated cavities on the surface of the support to form highly dense isolated metal active sites, leading to excellent reactivity in catalytic oxidation at low temperature. This work provides a general strategy for designing atomically dispersed noble‐metal catalysts with highly dense active sites.     

Sr_2CeO_4:Nd~(3+)纳米粒子的合成和近红外发光

采用甘氨酸-硝酸盐燃烧法制备了Sr2CeO4和Sr2CeO4:Nd3+发光纳米粒子。样品的结构及性质采用XRD,TEM,荧光光谱及荧光衰减曲线等进行表征。在1200℃煅烧1h能够得到均匀的类球形Sr2CeO4:Nd3+纳米粒子,其粒径大小为20~40nm,并具有良好的分散性和高效的近红外发光特性。Nd3+合适掺杂浓度为0.15%(摩尔分数)。对Sr2CeO4:Nd3+近红外发光的机制分析表明:通过基质Sr2CeO4吸收紫外光,基团CeO4发生了电荷转移达到激发态,并将激发态能量传递给了Nd3+,从而使Sr2CeO4:Nd3+产生了特征的近红外发射。     

Clicked Isoreticular Metal–Organic Frameworks and Their High Performance in the Selective Capture and Separation of Large Organic Molecules

Three highly porous metal–organic frameworks (MOFs) with a uniform rht‐type topological network but hierarchical pores were successfully constructed by the assembly of triazole‐containing dendritic hexacarboxylate ligands with Zn^II ions. These transparent MOF crystals present gradually increasing pore sizes upon extension of the length of the organic backbone, as clearly identified by structural analysis and gas‐adsorption experiments. The inherent accessibility of the pores to large molecules endows these materials with unique properties for the uptake of large guest molecules. The visible selective adsorption of dye molecules makes these MOFs highly promising porous materials for pore‐size‐dependent large‐molecule capture and separation.     

Four Metal Complexes Based on Bulky Imidazole Ligands: Solvothermal Syntheses,Crystal Structures,and Fluorescence Properties

In order to explore the influences of (de‐)protonation of the imidazole ring on the structural diversity of the resulting complexes, the imidazole‐based ligands 4, 5‐diphenylimidazole (Hdpi) and 1H‐phenanthro[9, 10‐d]imidazole (Hpi) were utilized as bulky building blocks to construct four complexes by solvothermal reactions, i.e. [Ag(Hdpi)₂](NO₃) · (H₂O) ( 1 ), [Cu(dpi)]_∞ ( 2 ), [Cu(Hpi)(NO₃)]_∞ ( 3 ), and [(H₂pi)(NO₃)] · H₂O ( 4 ). In complex 1 , two Hdpi ligands adopt a monodentate pattern and coordinate with one Ag^I ion to form a mononuclear unit, which is further connected by hydrogen bonds into a 1D supramolecular helix. The deprotonated dpi ligand of 2 acts in bidentate mode, and bridges Cu^I ions to afford a 1D chain. In 3 , the NO₃^– ion, acts as a monodentate bridging ligand and joins Cu^I ions to generate a 1D chain. The Hpi ligand employs a monodentate mode to bond with Cu^I ions of the 1D chain. 4 is protonated and two H₂pi nitrogen atoms are free of coordination. Interestingly, hydrogen bonds among the NO₃^– ion, the H₂pi ligand, and the water molecule yield a macro ring R⁴₄(14). The resulting structural diversity reveals that the (de‐)protonation of imidazole ring directly steers the coordination number of ligand, and thus causes a significant effect on the structure, especially the dimensionality. Furthermore, the solid‐state fluorescence properties of the free ligands and compounds 1 – 4 were studied at room temperature.     

Determination of five sesquiterpenoids in Xingnaojing injection by quantitative analysis of multiple components with a single marker

A quantitative analysis of multiple components with a single‐marker method was established for the simultaneous determination of five sesqutiterpenoids in Xingnaojing injection. This method was established with Xingnaojing injection determined by high‐performance liquid chromatography coupled with diode array detection. The durability and system suitability of the established method were evaluated, and the reliable relative correction factors were obtained with curdione selected as an internal reference. The contents of the five components in all Xingnaojing injections were determined by external standard method and the contents of curcumenone, curcumenol, curzerenone, and germacrone were also calculated with the obtained relative correction factors. Then, relative error was investigated to estimate the difference of the two methods. As a result, the established new method possesses good adaptability, and there is no significant difference between the two methods, except for the content of curzerenone in eight samples. To put the established method into practice, the limits of quantitation of the established method of the five components were proposed and defined. Thus, the developed methodology can also be utilized to the quality evaluation of Xingnaojing injection, in spite of the difference found in the content of curzerenone between the external standard method and the newly established method.